Business and industrial zone · section 12.7 of Zoning Bylaw No. 7850, 2007
M7: Concrete and Asphalt
M7 (Concrete and Asphalt) is a business and industrial zone for industry and warehousing. Buildings can cover up to 20% of the lot. New lots need at least 1 ha.
Read section 12.7 of the bylaw (PDF, opens in a new tab)Look up an addressZoning map
From the bylaw consolidated to Oct 5, 2026 · .
Purpose
“The purpose of this zone is to provide primarily for a concrete and asphalt plant.”
Section 12.7.1 of the bylaw.
What you can build and run here
In short: industry and warehousing.
Extra uses
Allowed alongside a main use (secondary uses).
Limits
| Minimum lot area | 1 ha |
|---|---|
| Site coverage | 20% |
These are the zone’s general limits for principal buildings. Accessory buildings, secondary dwellings, corner lots and parking have their own rules, and other sections of the bylaw (general rules, specific uses, landscaping, parking, development permit areas) also apply.
Where M7 applies
10 areas on the City’s zoning map, about 154 ha, covering 27 parcels.
Rezonings
From the bylaw’s list of amendments: 0 into M7, 0 out of it.
No rezonings to or from M7 in the amendment list.
This section was last changed by bylaw 8256.
A plain-language reading of the bylaw, not legal advice. Confirm with City of Prince George Planning and Development before you plan.
Source: Zoning Bylaw No. 7850, 2007, section 12.7 (uses, limits and purpose; quotes are short extracts), and City of Prince George open data for where the zone applies (Open Government Licence – City of Prince George). Summary written by PG Pulse. Data: JSON.
