Skip to content
PG Pulse
PG Pulse

Try searching for

Site specific zone · section 15.22 of Zoning Bylaw No. 7850, 2007

Z22: Mixed-Use Corridor

Z22 (Mixed-Use Corridor) is a site specific zone for shops and services, schools and institutions, homes (row houses, stacked townhouses and apartments) and offices. Density is capped at about 200 homes per hectare. Buildings can be up to 25 m tall (6 storeys) and cover up to 55% of the lot. New lots need at least 2.5 ha and 200 m of frontage.

Read section 15.22 of the bylaw (PDF, opens in a new tab)Look up an addressZoning map

From the bylaw consolidated to Oct 5, 2026 · .

Purpose

“The purpose of this zone is to provide for mixed-use developments which have a residential and commercial focus along Highway corridors.”

Section 15.22.1 of the bylaw.

What you can build and run here

In short: row houses, stacked townhouses, apartments; shops and services; schools and institutions; offices; parks and recreation.

Limits

Main limits of the Z22 zone
Minimum lot width200 m
Minimum lot area2.5 ha
Site coverage55%
Height25 m
Storeys6
Density200 homes per hectare

Density rule: “The maximum density is 200 dwellings/ha.”

These are the zone’s general limits for principal buildings. Accessory buildings, secondary dwellings, corner lots and parking have their own rules, and other sections of the bylaw (general rules, specific uses, landscaping, parking, development permit areas) also apply.

Where Z22 applies

1 areas on the City’s zoning map, about 3 ha, covering 1 parcels.

Rezonings

From the bylaw’s list of amendments since 2026: 1 into Z22, 0 out of it.

  • 2000 Central Street E

    Aug 17, 2026 · Rezoned from RM3 to Z22

A plain-language reading of the bylaw, not legal advice. Confirm with City of Prince George Planning and Development before you plan.

Source: Zoning Bylaw No. 7850, 2007, section 15.22 (uses, limits and purpose; quotes are short extracts), and City of Prince George open data for where the zone applies (Open Government Licence – City of Prince George). Summary written by PG Pulse. Data: JSON.

Add PG Pulse to your home screen

Your browser installs apps from its Share menu.

  1. Tap Share in the browser toolbar (at the bottom of the screen on iPhone, at the top on iPad).
  2. Scroll down and tap Add to Home Screen.
  3. Tap Add. PG Pulse opens from its icon like any other app.