Skip to content
PG Pulse
PG Pulse

Try searching for

Site specific zone · section 15.3 of Zoning Bylaw No. 7850, 2007

Z3: Retail & Warehouse Sales

Z3 (Retail & Warehouse Sales) is a site specific zone for shops and services, vehicle sales and service and industry and warehousing. Buildings can be up to 12 m tall and cover up to 50% of the lot. New lots need at least 3,000 m² and 30 m of frontage.

Read section 15.3 of the bylaw (PDF, opens in a new tab)Look up an addressZoning map

From the bylaw consolidated to Oct 5, 2026 · .

Purpose

“The purpose of this zone is to provide site-specific regulations for a specific area, primarily for auto-oriented retail and wholesale uses that require large, low profile buildings in highly visible locations.”

Section 15.3.1 of the bylaw.

What you can build and run here

In short: shops and services; vehicle sales and service; industry and warehousing.

Extra uses

Allowed alongside a main use (secondary uses).

Limits

Main limits of the Z3 zone
Minimum lot width30 m
Minimum lot area3,000 m²
Site coverage50%
Height12 m
Front yard9 m
Interior side yard9 m
Exterior side yard9 m
Rear yard9 m

These are the zone’s general limits for principal buildings. Accessory buildings, secondary dwellings, corner lots and parking have their own rules, and other sections of the bylaw (general rules, specific uses, landscaping, parking, development permit areas) also apply.

Where Z3 applies

2 areas on the City’s zoning map, about 9 ha, covering 3 parcels.

Rezonings

From the bylaw’s list of amendments since 2022: 0 into Z3, 1 out of it.

  • 3300 Massey Drive

    Feb 7, 2022 · Rezoned from AG, Z3 to AG, C2c

This section was last changed by bylaw 8256.

A plain-language reading of the bylaw, not legal advice. Confirm with City of Prince George Planning and Development before you plan.

Source: Zoning Bylaw No. 7850, 2007, section 15.3 (uses, limits and purpose; quotes are short extracts), and City of Prince George open data for where the zone applies (Open Government Licence – City of Prince George). Summary written by PG Pulse. Data: JSON.

Add PG Pulse to your home screen

Your browser installs apps from its Share menu.

  1. Tap Share in the browser toolbar (at the bottom of the screen on iPhone, at the top on iPad).
  2. Scroll down and tap Add to Home Screen.
  3. Tap Add. PG Pulse opens from its icon like any other app.